1. <u id="nctcy"></u>

          Tel: +86-519-86511555
          Fax: +86-519-86518620

          Products Catalog

          TD75 general belt conveyor DT II, DT II (A) fixed belt conveyor DJ, DJ II large dip angle conveyor with corrugated sidewall belt Mobile belt conveyor Screw conveyor Exhibition of Main Accessories 1 Exhibition of Main Accessories 2 Assembly of TD75 General Belt Conveyor Components of DT II Fixed Belt Conveyor Components of DT II (A) Fixed Conveyor Jiangsu Wuyun Transmission Machinery Co., Ltd.
          Path: Home >> Products Catalog >>

          DJ, DJ II large dip angle conveyor with corrugated sidewall belt

          Time:2016-04-18 Form:Jiangsu Wuyun Hit:2237

          /

          1. Use and scope of application

          DJ, DJ II large dip angle conveyor with corrugated sidewall belt is able to continuously transport bulk material by a large angle. It can transport bulk material with density ranging from 500 to 2500kg/m3, and is widely applied to various industries including metallurgy, mine, coal, construction material, chemical engineering, light industry, harbor, food, shipping, etc. 

          This conveyor is applicable to operation environment with temperature around -25℃~40℃. With corresponding protective measures applied, it can also operate under conditions with special requirements, such as explosion-proof, waterproof, fire-retardant, corrosion/high temperature/cold resistant.

           

          2.Technical features and structure diagram

           

          •  By making use of tape carrier with corrugated sidewall and diaphragm, this product can achieve a maximum dip angle of 90°, and also saves floor space; 
          •  The conveyor features large transport quantity, low energy consumption, simple structure, convenient maintenance, and long service life of tape carrier. 
          •  Belt conveyor can be divided into the following categories according to belt width: 500, 650, 800, 1000, 1200, 1400, 1600;
          •  Belt conveyor can be divided into the following categories according to belt velocity: 0.8, 1.0, 1.25, 1.6, 2.0, 2.5, 3.15

          图片点击放大
          1. Head funnel 2. Head drum 3. Lift type cleaner 4. Headstock 5. Convex section idler
          6. Convex section stock 7. Deviation prevention device 8. Upper parallel idler 9. Bend drum
          10. Redirection pinch roller device 11. Concave section stock 12. Non-load section cleaner 13. Buffer idler 14. Tail bend drum 15. Spiral tension device
          16. Tailstock 17. Material-guiding groove 18. Tape carrier 19. Supporting idler 
          20. Lower parallel idler

          3. Main technical parameters

          Belt width (mm)

          Flange height (mm)

          Maximum transport quantity (m3/h)

          Dip angle(°)

          Belt velocity (m/s)

          Belt width (mm)

          Flange height (mm)

          Maximum transport quantity (m3/h)

          Dip angle(°)

          Belt velocity (m/s)

          400

          60

          28

          30°

          90°

          0.8-2.0

          1000

          200

          518

          30°

          90°

          1.0-2.5

          80

          54

          240

          708

          120

          94

          1200

          160

          702

          1.0-3.15

          500

          80

          78

          0.8-2.0

          200

          788

          120

          104

          240

          1077

          160

          130

          1400

          200

          942

          1.0-3.15

          650

          80

          118

          0.8-2.0

          240

          1329

          120

          156

          300

          1613

          160

          210

          400

          2457

          800

          120

          248

          0.8-2.5

          1600

          200

          1118

          1.0-3.15

          160

          340

          240

          1578

          200

          370

          300

          1934

          1000

          160

          465

          1.0-2.5

          400

          2961


          Note: the transport capacity in the table is calculated when dip angle = 30°.The calculation value is obtained by using the maximum belt velocity and minimum diaphragm allowed by the specifications.

          腾讯分分